Sliding Patio Doors Repair
Sliding patio doors are ideal for enjoying your outdoor space, but they can become difficult to open and close. This can be due to many issues, such as dirty tracks or poorly aligned sliders.
Clean and lubricate your rollers. You can also re-align the rollers by using the adjustment holes on the bottom of the door panel that can be moved.
Track that is damaged or dirty
A damaged or dirty track can cause the sliding door to not slide properly. Over time, dirt, grit and even rust can accumulate, preventing the track from moving smoothly. The solution is to clean the track thoroughly with the use of a brush and mild detergent. This job should be done regularly to ensure a smooth operation and prevent expensive repairs in the future.
A leaky door is a common problem that requires immediate attention to prevent water damage, mold growth and structural damage. The problem is often caused by worn weather stripping and a misaligned doors. This can be fixed by replacing the old weather stripping and aligning the doors.
Another issue that can be fixed with a little DIY work is rollers that jump off their tracks. Recruit a friend to help you with this task as the door could be heavy. In the house, and then lean a panel towards you to move the rollers. Once the panel is lifted off the bottom track, you'll need to place it on sawhorses to keep it from falling off. Then, loosen the roller's screws and pry them with the screwdriver. It is now possible to remove any dirt that has accumulated between the wheel and the tracks. Clean each wheel using denatured alcohol on a rug. Reposition the wheels to their tracks and attach them again.
It may be possible to straighten a bent section of track using a mallet made of rubber and a piece of wood. However in the event that the bent portion is near the hinges and has the potential to cause further damage, you'll better off calling an expert to ensure safety.
Misaligned Rollers
If your sliding door is experiencing a problem sliding, it's most likely that the roller wheels have been misaligned. The wheels may be rusted or dirty, and their bearings are worn down. This friction causes the door to become snagged and grind when it is opened or closed. This can also result in squeaking sounds.
This is a straightforward fix. It is not necessary to take off the door to access the wheels since they are mounted on a bracket that is adjustable. Use a screwdriver to locate the adjustment holes on the frame (usually either side). Rotate the screws to control the wheels. A clockwise rotation of the screw raises the wheel, while a counterclockwise turn lowers it. Continue adjusting the door until it opens and closes effortlessly.
It's important to adjust the wheels prior to adjusting the latch. The latch hooks need to align with the strike plate (the opening into which the latch locks) to allow the lock to work properly. If you don't do this, the latch could accidentally open or close when you're out of the room.
A sliding patio door is an investment. Keeping them in good condition will keep your family safe. By addressing common issues like broken tracks, rollers and handles, you can avoid costly repairs in the near future. Contact us for more information about patio doors. We will assess your needs for repair of your sliding patio door and help you keep it in good shape. Our professionals are also able to assist with any replacement parts you may need.
Damaged or loosely held door frame
Sliding patio doors are a great addition to any home and offer an attractive and convenient alternative to swing-open or hinged patio door options. But, just like any other type of hardware that they are, they could face many issues in time. A lot of these issues can be fixed with a little DIY skills.
A common issue that affects sliding patio doors is a gap in the frame. This can be caused by a variety of factors, such as a misaligned track or rollers, a damaged track or door, or a bent door frame. In most cases the reason for this issue can be resolved by removal of the door and reconnecting the track or rolling elements. It is crucial to be cautious not to cause damage to the frame or track.
In some cases it may be required for the entire track to be replaced. This can be accomplished easily with the universal kit that is readily available at major hardware stores. These kits are simple to install and will get your door working properly in no time.
Regularly inspect the hardware of your sliding door and frame for signs of wear, like loose screws or bolts. They can usually be tightened with a screwdriver, or wrench and is a simple and effective DIY patio door maintenance process. In addition, it is essential to oil your rollers and tracks to facilitate smooth operation and avoid premature wear.
Patio doors are usually the primary entry point to the backyard and outdoor living space for many homeowners. To ensure peace and security within the home, it is essential that they function correctly. By taking the time to implement these easy DIY maintenance steps, homeowners can prolong the life span of their sliding patio doors and minimize expensive repairs or replacements.
Handle is not working properly
Sliding patio door are a great way to get into your home and access your backyard, however they can become difficult to operate when they are misaligned. A damaged handle could cause the door to get stuck or be difficult to open and close. Fixing a loose handle can be accomplished at home.
In most instances, a loose handle is the result of screws that have worked through the backplate. To remedy this problem you can simply tighten the two screws that are on the inside of the handle with the help of a screwdriver. If you find that the handle is loose, it could be an indication that the threads have worn and will need to be replaced.
Alternatively, a broken latch might be the culprit. It is more likely that the latch will break if it's made of metal, rather than plastic. If the latch is not catching or turning it, try oiling it first to see if it can help. If this does not work, you may need to replace the lock.
Finally, the handle itself could become difficult to use in the event that it is broken or cracked. If this happens it is necessary to replace it with a brand new handle that matches the style of your sliding patio door.
Whether your patio doors are old and outdated or new, Feldco can help you get them back on track. We offer high-quality doors in a variety of sizes and styles that can be adapted to perfectly fit your home. Contact us today for more about our doors! We provide services to Southern California homeowners, including Ventura County and Orange County.
patio door repairs Weatherstripping
It's time to replace your weather stripping if notice light coming from doors and windows, or feel a draft pulling towards the door or window. The strips form an airtight seal that stops unwanted water, air and pests from getting into your home. It also keeps your conditioned and heated air inside, thereby saving energy costs all year round.
It could have lost its strong, bouncy seal due to aging. It is easy to determine this by running a dollar bill under the seal at the top and bottom of the jamb and the door frame, where they overlap. If the dollar bill slides between the seal and the door easily, it is time to replace the weatherstripping.
If you only replace the worn-out portion of weather stripping, it could cause future problems with the seal. It's far more effective to replace the entire stripping, so that you are able to rest that your door is sealed again.
Follow our DIY guide to weather stripping and install the correct material for your sliding patio door and frame, to ensure a tight, lasting seal. This is a great way for you to save energy costs and repair your sliding patio door. Don't wait until it's too late. You'll save money and improve the look of your home.